Español Français English |
VALLEY SNOWPLOWDESCRIPTIONRODA® VALLEY Snowplow VALLEY STEM® ideal for forest trails, roads, airports, etc. It can be installed on any type of agricultural vehicle from 80 HP or industrial loaders. It is composed of two independent blades and has left-right and straight snow cleaning hydraulic shift. The cleaning is performed by means of two oversized double effect cylinders. It does not have lifting system, so it requires a frontal elevator (not required in loaders). For loaders, the snowplow is delivered with the adequate fastening equipment. It has "ANTICHOC" mechanical system by means of eight springs that in the case of colliding with an obstacle the sheet tilts, clearing the obstacle and automatically recovering its original position. The easily replaceable 180x18 blade made of high anti-wear resistance tempered steel to the wear (320 Brinel) and fastened by a rubber base, guaranteeing adaptation to small surface irregularities. It has stabilization balancing for a permanent blade-surface adhesion. 15º side oscillation 33º maximum blade sweeping angle It includes easily replaceable height adjustable roller. The third fastening point of the machine records the height from the snowplow tip to the surface to be cleaned. The blade can be quickly coupled to the three frontal points according to DIN Standard. The snowplow is coupled by means of a positioner. TECHNICAL FEATURES
|